Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
----End
Follow-up Procedure
Commission the other cameras by referring to this section.
6.3.2.3 Commissioning IPC6225 Cameras
Prerequisites
If multiple cameras are accessed, retain the connection of one camera and disconnect
connections from other cameras. After commissioning the connected camera, commission
other cameras in the same way.
Procedure
Step 1 Log in to the camera WebUI.
1.
Issue 03 (2019-03-10)
Figure 6-21 Setting secondary stream 1 parameters
Configure the PC IP address and the camera IP address in the same network segment.
Enter the camera IP address (192.168.0.120 by default) in the address bar of the Internet
Explorer and press Enter button.
The following lists the requirements of the operating system and browser for logging in to the camera
through the WebUI.
Windows 7: Internet Explorer 8/9/10/11. Chrome 32+, and FireFox 35+
Windows 8: Internet Explorer 10/11, Chrome 32+, and FireFox 35+
Windows 10: Internet Explorer 11, Chrome 32+, and FireFox 35+
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
146
Advertisement
Table of Contents
