Huawei iManager NetEco 6000 Device Installation And Commissioning Manual page 259

iManager NetEco 6000
Device Installation and Commissioning Guide
Figure 6-86 Page for managing transparent transmission channels


----End
Issue 03 (2019-03-10)
If Connection mode is set to Compatible, click Confirm.
On the ECC800 WebUI, Enable Security Authentication is set to Disable.
If Connection mode is set to Security protocol, enter the value of Confirm password
that has been set on the ECC800 WebUI, and click Confirm.
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
248