Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
2.
3.
Step 5 Register with the OCX plug-in.
Restart Internet Explorer and enter the IP address to be accessed by the client. The page for
watching videos is displayed. Click Install according to the prompt message. After the OCX
plug-in is installed, you can watch the videos. If videos are not displayed, contact Huawei
technical support.
Step 6 If the OCX plug-in needs to be registered on the client again, perform the following
operations to uninstall the OCX plug-in and then re-install it:
1.
Issue 03 (2019-03-10)
Figure 6-26 Security setting – trusted stand region
Enable the following options and then click Ok.
−
Initialize and script ActiveX controls not marked as safe
−
Script ActiveX controls marked safe for scripting
−
Download signed ActiveX controls
−
Download unsigned ActiveX controls
A dialog box is displayed, indicating Does the determination need to change the
establishment of this region?. Click Yes.
If it is the first time to install the plug, you need to wait about 10 to 20 seconds.
Close Internet Explorer.
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
154
Advertisement
Table of Contents
