Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
Procedure
Step 1 Use a PC that has an IP address in the same network segment with that of the ECC500 V6
collector, enter https://XX.XX.XX.XX in the address bar, and click Enter on the keyboard.
Step 2 (Optional) Install a security certificate when logging in to the page. Click Continue to this
website (not recommended), as shown in
Figure 8-5 Prompt message indicating an incorrect certificate
Step 3 Enter the user name admin and the initial password 000001 or Changeme, and click Login.
Step 4 Choose Maintenance > User Management.
Step 5 Select the user you want to change, as shown in
Issue 03 (2019-03-10)
XX.XX.XX.XX indicates the IP address of the collector.
This operation is performed on the Windows 7 OS. If other OSs are used, perform this operation based
on actual conditions.
Copyright © Huawei Technologies Co., Ltd.
Figure
8-5.
Figure
8-6.
8 FAQ
301
Advertisement
Table of Contents
