Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
Name
Name
Direction
Layout
Half-Size
Cabinet
Aisle
Size
Aisle
Containm
ent Type
Optional list
Parent
Object
Type
Manufact
urer
Serial
Number
Location
Install
Mode
Wire
Type
Airflow
Type
Height
Issue 03 (2019-03-10)
Description
Name of the device.
Set to Horizontal by default.
Chooses in the dropdown box Horizontal or Vertical.
Set to single-row wide aisle1 by default.
Chooses behind in the dropdown box the single-row wide aisle1, single-row
wide aisle2, dual-row wide aisle, single-row narrow aisle1, single-row
narrow aisle2 and single-row dual aisle.
Set to 11 by default.
The value is an integer ranging from 4 to 50.
Set to 1200 by default.
The value is an integer ranging from 0 to 65535.
Set to Cool Aisle by default
Chooses in the dropdown box Hot Aisle or Cool Aisle.
Management domain of the device.
The NetEco automatically identifies this name.
Device type.
The NetEco automatically identifies this name.
Manufacturer of the device.
The value contains 1 to 64 characters.
Device number.
The value contains 0 to 64 characters.
Location of the device.
The value contains 0 to 64 characters.
Set to Floor Build In by default.
Installation mode of the device, including Floor Build In, Cabinet Build In,
Wall Build In and Ceiling Installation.
Set to Ascending Line by default.
Wiring mode of the device, including Ascending Line, Down Line and Floor
Line.
Set to Vertical Under-Floor Air-Distribution by default.
A total of five airflow types, such as the Vertical Under-Floor
Air-Distribution, Horizontal Displacement Air-Distribution and Side
Displacement Air-Distribution.
Set to 2000 by default.
Chooses the 2000 number or the 2200 number in the dropdown box.
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
129
Advertisement
Table of Contents
