Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
Figure 3-18 Installing an infrared sensor (method 2)
Step 5 Loosen the bracket on the base, adjust the sensor angle so that the sensor can cover the target
area, and then secure the bracket.
----End
3.6.5 Installing a WS332M2-5 Ambient Temperature and
Humidity Sensor
Prerequisites
The object where you plan to install the ambient temperature and humidity sensor has been
installed.
Context
Procedure
Step 1 Install the ambient temperature and humidity sensor to the position specified on the wall, and
secure it using bolts.
Step 2 Press down the strip on the ambient temperature and humidity sensor. Align the strip with the
hole in the sensor base, and then secure the ambient temperature and humidity sensor to the
base.
Issue 03 (2019-03-10)
Ambient temperature and humidity sensors can be installed on different objects based on
scenarios. This section describes how to install an ambient temperature and humidity
sensor on a wall.
The effective monitoring area is 20 square meters for each ambient temperature and
humidity sensor. Lay them out based on the areas to be monitored.
Copyright © Huawei Technologies Co., Ltd.
3 Installing Devices
27
Advertisement
Table of Contents
