Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
Step 7 Click ... following the Current Alarm. Select alarms to be bound to the icon.
Figure 6-61 Binding alarms
Step 8 Click Yes.
Step 9 In the Property Panel, click Extend Properties then configure basic properties for the icon.
Issue 03 (2019-03-10)
After the managed object and counter are bound, you can remotely open and close a door using the door
status sensor icon.
1. Click the door status sensor icon and choose Close or Open under
2. In the displayed dialog box, click Yes.
You can bind a maximum of 20 alarms to a measurement object. After an alarm is bound with a device
icon, the color of the device icon will be changed to that of the color indicating that the bound alarm is
generated.
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
.
199
Advertisement
Table of Contents
