Adding A Module - Huawei iManager NetEco 6000 Device Installation And Commissioning Manual

iManager NetEco 6000
Device Installation and Commissioning Guide
Item
UPS
Working
Mode
Has
Generator
Frequency
Refrigeration Info
Cooling
Model
Air-Distribu
tion
Plan
Refrigeratin
g
Capacity(k
W)
4.
Step 3 Click
----End

6.1.2 Adding a Module

You can create a modular in the equipment room, branch, root node, union box, or subnet
management domain.
Prerequisites


Issue 03 (2019-03-10)
Description
UPS working mode of the
created management
domain
Generator for the created
management domain
Mains frequency of the
created management
domain
Cooling mode of the
created management
domain
Air supply mode of the
created management
domain
Cooling power of the
created management
domain
The parameters with * must be set. Other parameters are optional. The value of Planned Rack Position
cannot be changed after it is set. The number of racks cannot exceed the planned number of rack places.
Therefore, the planned number of rack places should be set to a value great enough to meet the
requirements for rack view creation.
Click on the toolbar.
Repeat steps Step 2.1
on the toolbar.
You have logged in to the NetEco client by web browser
You have created an equipment room or NetEco site in Data Center Planning. For
detailed operations, see Creating a Domain.
Copyright © Huawei Technologies Co., Ltd.
Configuration Requirements
Select N, N+X(X=1–N), 2N, or 2(N+1) from
the drop-down list box.
Select NULL, Single Generator, or Dua
Generator from the drop-down list box.
Select 50HZ or 60HZ from the drop-down list
box.
Select Water Cooled Direct Expansion, Air
Cooled Direct Expansion, or Chilled-water
refrigeration from the drop-down list box.
Select Vertical under-floor Air-distribution
or Horizontal displacement Air-distribution
from the drop-down list box.
Range: floating point number of 1-10000000
(accurate to three decimal places)
to Step 2.4 until the configuration is complete.
6 Adding Devices
127