Routine Maintenance For The Region-Type Water Sensor And Water Detection Cable; Routine Maintenance For The Location-Type Water Sensor And Water Detection Cable; Semi-Annual Maintenance; Routine Maintenance For The Switch - Huawei iManager NetEco 6000 Device Installation And Commissioning Manual

iManager NetEco 6000
Device Installation and Commissioning Guide
7.1.1.6 Routine Maintenance for the Region-type Water Sensor and Water
Detection Cable
Table 7-6 Routine maintenance for the region-type water sensor and water detection cable
Item
Functions of the
water sensor
and water
detection cable
7.1.1.7 Routine Maintenance for the Location-type Water Sensor and Water
Detection Cable
Table 7-7 Routine maintenance for the location-type water sensor and water detection cable
Item
Functions of the
water sensor
and water
detection cable

7.1.2 Semi-Annual Maintenance

7.1.2.1 Routine Maintenance for the Switch

Table 7-8 Routine maintenance for the switch
Item
Issue 03 (2019-03-10)
Maintenance
Frequency
Monthly
Maintenance
Frequency
Monthly
Maintenan Method
ce Interval
Copyright © Huawei Technologies Co., Ltd.
Method Expected
Result
Place the water A water leakage
detection cable alarm is
into water and generated.
check whether a
water leakage
alarm is
generated by
the water
sensor.
Method Expected
Result
Place the water A water leakage
detection cable alarm is
into water and generated.
check whether a
water leakage
alarm is
generated by
the water
sensor.
Expected
Result
7 Device Maintenance
Exception
Handling
If no water
leakage alarm is
generated,
replace the
water detection
cable.
Exception
Handling
When there is
no water
leakage alarm
generated,
replace the
water sensor if
the sensor sends
an alarm, and
replace the
water detection
cable if the
detection cable
sends an alarm.
Exception Handling
255