Installing The Sms Modem - Huawei iManager NetEco 6000 Device Installation And Commissioning Manual

iManager NetEco 6000
Device Installation and Commissioning Guide
No.
4
5
3
6
7
8

4.1.2 Installing the SMS Modem

Prerequisites
An idle serial port is available on the server.
Context
Figure 4-4
Figure 4-4 Ports on the SMS modem
(1) Connecting to the SIM card
(3) Connecting to the power cable
Issue 03 (2019-03-10)
Interface
Type
eth2 GE
interface
eth3 GE
interface
VGA interface
iBMC
management
network
interface
Server serial
interface
USB interface
shows the ports on the SMS modem.
Copyright © Huawei Technologies Co., Ltd.
4 Connecting Monitoring Cables to Devices
Description
not adopted, only eth0 or eth1 is required.

If southbound and northbound network isolation is
adopted, both eth0 (or eth1) and eth2 (eth3) are
required.
eth0 (or eth1) is used for providing southbound
services while eth2 (or eth3) is used for providing
northbound services.
Used for connecting to the monitor or KVM.
Used for connecting to the PC to manage the 2288H
V5 server.
Used for connecting to the SMS modem or
commissioning.
Used for connecting to the mobile storage device.
(2) Connecting to the antenna
(4) Serial port
62