iManager NetEco 6000
Device Installation and Commissioning Guide
Figure 3-64 Installing an emergency door release button
1.
2.
3.
----End
Issue 03 (2019-03-10)
Install the base of the emergency door release button, as shown by (1) in
Install the glass panel of the emergency door release button, as shown by (2) and (3) in
Figure
3-64.
Tighten screws for the emergency door release button using a Phillips screwdriver, as
shown by (4) in
Figure
Copyright © Huawei Technologies Co., Ltd.
3-64.
3 Installing Devices
Figure
3-64.
58