Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
Figure 6-71 Configuring parameters for a NTC
Table 6-29 Parameter description
Parameter
Name
IP address
Port
Device address
Issue 03 (2019-03-10)
Description
Device name
Set this parameter to the IP address of the collector to which the
device is connected.
The NTC port number is the same as the ECC port number for the
independent deployment AI/DI unit. Fill in the actual value by
referring to Setting RS485 Parameters for the ECC500 V6 Collector.
The device address is configured using the DIP switch of the
independent deployment AI/DI unit.
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
212
Advertisement
Table of Contents
