Monitoring Signal Cable Connections - Huawei BTS3900C Hardware Description

BTS3900C (Ver.C)
Hardware Description
Trans
missi
on
Mode
UMTS
E1/T1
+LTE
FE/GE
UMTS
FE/GE
+LTE
FE/GE
Figure 7-8 Transmission cable connections in a dual-mode base station in separate transmission
mode
T1: E1/T1 Surge Protection
Transfer Cable
T5:
Cable

7.3.3 Monitoring Signal Cable Connections

This section describes the monitoring signal cable connections for a BTS3900C AC cabinet and
a BTS3900C DC cabinet.
Issue 03 (2013-05-27)
Mode Application Scenario
Supp
orted
UMTS Scenario 1: The UTRP is not configured. The
+LTE transmission cables are connected to the E1/T1 port on
the WMPT or UMPT and the FE optical or electrical
port on the LMPT or UMPT.
Scenario 2: The UTRP is configured on the UMTS
side. The transmission cable is connected to the E1/T1
port on the UTRP and to the FE electrical or optical
port on the LMPT or UMPT.
UMTS Scenario 1: The transmission cables are connected to
+LTE the FE electrical port on the LMPT or UMPT and the
WMPT or UMPT.
Scenario 2: The transmission cables are connected to
the FE optical port on the LMPT or UMPT and FE
electrical port on the WMPT or UMPT.
T2:
7.6.3 FE/GE Ethernet -
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7.6.1 E1/T1 Cable T3: 7.6.7 FE/GE Fiber
Optic Cable
-
7 BTS3900C Cables
Legend
"5" in the
Figure 7-8
shows the cable
connections in
scenario 1.
"6" in the
Figure 7-8
shows the cable
connections in
scenario 1.
T4: FE Surge Protection
Transfer Cable
-
141