Huawei iManager NetEco 6000 Device Installation And Commissioning Manual page 74

Hide thumbs Also See for iManager NetEco 6000:
Table of Contents

Advertisement

iManager NetEco 6000
Device Installation and Commissioning Guide
Procedure
Step 1 Insert a SIM card into the SMS modem.
Use a tool such as the small screwdriver to press the yellow key. Put the SIM card on the
ejected tray, and insert the tray into the SMS modem.
Step 2 Connect the antenna to the antenna connector.
Step 3 Connect the serial port cable.
One end of the cable connects the SMS modem and the other end connects an idle serial port
on the server, serial port on the server see Server Port Description.
Step 4 Connect the power cable.
1.
2.
3.
After the power cable is connected, switch on the power. Normally, the indicator of the SMS
modem blinks regularly.
SMS modem.
Table 4-4 Relations between the status of the indicator and the SMS modem
Indicator
On
Blinks slowly
Blinks quickly
Off
Step 5 Install the SMS modem driver.
To install the SMS modem driver, see the specifications delivered with the SMS modem.
----End
Issue 03 (2019-03-10)
For details, see the user manual delivered with the SMS modem.
Use the connector convertor delivered with the SMS modem if the connector of the serial cable does not
match the serial port on the server.
Connect one end of the power adapter to the SMS modem. For details, see the
specifications delivered with the SMS modem.
Connect the other end of the power adapter to the universal conversion C1 socket.
Connect the other end of the universal conversion C1 socket to the rPDU through a
transfer cable (C13/C14 cable or China standard C13 cable).
Table 4-4
You need to install the driver only when the installation of the driver is required in the specifications
delivered with the SMS modem.
Copyright © Huawei Technologies Co., Ltd.
4 Connecting Monitoring Cables to Devices
shows how the indicator indicates the work status of the
Modem
The SMS modem is activated and is not registered with
the network.
The SMS modem is connected to the network and is in
idle mode.
The SMS modem is in transmission mode.
The SMS modem is deactivated.
63

Advertisement

Table of Contents
loading

Table of Contents