Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
Figure 6-23 Setting secondary stream 1 parameters
----End
Follow-up Procedure
Commission the other cameras by referring to this section.
6.3.2.4 Adding a Camera on the VCN500
Prerequisites
The network communication between the VCN500 and the camera is normal.
Procedure
Step 1 Install Client/Server (C/S) client.
1.
Method 1
Method 2
Issue 03 (2019-03-10)
The version number is subject to the Quick Start delivered with the VCN500. The description and link in
this document are for reference only.
Download the client/server (C/S) client.
You can obtain the C/S client in either of the following ways:
Obtain the HW_IVS_Client.exe file from the software CD-ROM delivered
with the VCN.
1. Log in to the VCN OMU Portal, choose Local Configuration > Basic
Configuration, and view Current version.
2. Log in to http://support.huawei.com/enterprise/. Choose TECHNICAL
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
148
Advertisement
Table of Contents
