Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
Figure 6-59 Property Panel
Step 4 Type the name for the icon and click Setting. The Setting Rule dialog box is displayed.
1.
2.
Figure 6-60 Setting Rule
Step 5 In the Basic Properties pane in the Property Panel dialog box, click ... following the
Attributeto configure data for the door status sensor icon.
Step 6 On the displayed Select Data page, select Managed Object and Attribute. Then, click OK.
Issue 03 (2019-03-10)
In the Setting Rule dialog box, configure the real-time value. The value consistent with
real-time signal value.
Click OK.
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
198
Advertisement
Table of Contents
