Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
3.8.2 Installing an In-Room Double-Door Magnetic Lock
Context
Procedure
Step 1 Fold the delivered cutout template along the dotted line by 90° , as shown by (2) in
3-45.
Step 2 Close the door, place the cutout template at the midline of the door frame in the door opening
direction, mark the mounting holes, and drill holes, as shown in
Figure 3-45 Marking mounting holes
(1) Door frame
Step 3 Remove the hoisting strip using the delivered hex key.
Issue 03 (2019-03-10)
The magnetic lock supports a double-door that can be rotated open outwards. The door
frame should be over 42 mm thick. A glass door is not supported.
The cable routes are planned.
Four hex socket screws need to be removed in this step.
Copyright © Huawei Technologies Co., Ltd.
(2) Cutout template
3 Installing Devices
Figure
Figure
3-45.
(3) Door panel
45
Advertisement
Table of Contents
