Installing A Region-Type Water Sensor - Huawei iManager NetEco 6000 Device Installation And Commissioning Manual

iManager NetEco 6000
Device Installation and Commissioning Guide
Figure 3-19 Installing the ambient temperature and humidity sensor
----End

3.6.6 Installing a Region-type Water Sensor

Context

Issue 03 (2019-03-10)
 For details about how to install an ambient temperature and humidity sensor and connect its cables,
see shipped documents.
 Connect cables to an ambient temperature and humidity sensor before installation.
A water sensor consists of a water detection cable, water detector, and conversion cable.
The water detection cable is laid out on the floor, connecting to the water detector placed
near the collector by the conversion cable.
Copyright © Huawei Technologies Co., Ltd.
3 Installing Devices
28