Table of Contents
Advertisement
iManager NetEco 6000
Device Installation and Commissioning Guide
8.6 How Do I Change the NetEco IP Address?
Prerequisites
Procedure
Step 1 Change the NetEco IP address.
1.
2.
3.
4.
5.
6.
Step 2 Update the NetEco IP address on the ECC800 WebUI.
1.
Table 8-2 NetEco parameters
Path
System
Settings >
NMS
Application >
NetEco >
Communicati
on
Parameters
Step 3 Update the trap target IP address on the ECC500 WebUI.
Issue 03 (2019-03-10)
You have logged in to the PowerEcho client using a browser.
You have the operation rights of the ECC800 WebUI, ECC500 WebUI, and UPS2000–G.
In the browser address bar, enter https://IP address of the NetEco server:32804/, enter the
User Name and Password, and press Enter to access the PowerEcho client.
The default user name for the PowerEcho is admin and the default password is Changeme_123.
After choose NetEco Maintenance from the main menu, then choose Server IP
Address in the navigation tree on the left side.
Select Change NetEco/Server IP Address in Select, select the network management IP
address you want to modify in Current IP Address.
Enter the new IP address, subnet mask, and gateway for New IP Address, New Subnet
Mask, and New Gateway respectively.
Click Confirm.
Choose Start/Stop NetEco on the left, click Start, type the Password for PowerEcho,
and click Confirm. Click Confirm in the displayed dialog box to start the NetEco
services.
After changing the server IP, please wait for at least 5 minutes and use the new IP address to log in to the
PowerEcho to start NetEco services.
Log in to the ECC800 WebUI.
Parameter
Server IP
Port number
Link to the
monitoring IP
address
Copyright © Huawei Technologies Co., Ltd.
Default
Setting Value
Value
192.168.0.1
IP address of the primary NetEco server
1
NOTE
The NetEco IP address and the ECC800 IP
address must be configured in the same
network to ensure normal connection
between the NetEco and the ECC800.
31220
31220
WAN_1
WAN_1
8 FAQ
303
Advertisement
Table of Contents
