Changing Initial Passwords; Changing The Initial Password Of The Default Ibmc User - Huawei FusionServer Pro 2288X V5 User Manual

FusionServer Pro 2288X V5 Server
User Guide
Step
Upgrade the system.
Documents
●
●
●
●
●
●

7.4.3 Changing Initial Passwords

7.4.3.1 Changing the Initial Password of the Default iBMC User

Scenarios
This section describes how to change the initial password of the default iBMC user
on the iBMC WebUI.
You can change the initial password of the default iBMC user on:
●
●
Procedure
Step 1 Log in to the iBMC WebUI.
For details, see
Issue 04 (2020-06-05)
Configure the iBMC. The configuration method varies depending on the iBMC
version. For details, see
Configure RAID settings. For details, see
Card User Guide.
Configure BIOS settings. For details, see
BIOS Parameter Reference.
Install the operating system. For details, see
Guide.
Handle alarms. For details, see
Handling.
Rectify faults. For details, see
iBMC WebUI
For details, see FusionServer Pro Rack Server iBMC User
iBMC CLI
For details, see FusionServer Pro Rack Server iBMC User
● The default user name of the iBMC is Administrator, and the default password is
Admin@9000.
● For security purposes, change the initial password upon the first login and change the
password periodically.
● You are advised to use a password that meets complexity requirements or to enable the
password complexity check function.
● The password complexity check function is enabled by default.
9.2 Logging In to the iBMC
Copyright © Huawei Technologies Co., Ltd.
Description
Upgrade software or firmware, and install or update
drivers to the latest versions.
FusionServer Pro Rack Server iBMC User
FusionServer Pro Rack Server iBMC Alarm
Huawei Servers
WebUI.
7 Installation and Configuration
Huawei V5 Server RAID Controller
Huawei Server Purley Platform
Huawei Server OS Installation
Troubleshooting.
Guide.
Guide.
Guide.
99