Changing Initial Passwords; Changing The Initial Password Of The Default Ibmc User - Huawei FusionServer Pro 2288H V5 User Manual

FusionServer Pro 2288H V5 Server
User Guide
Step
Upgrade the system.
Documents
l
l
l
l
l
l

7.4.3 Changing Initial Passwords

7.4.3.1 Changing the Initial Password of the Default iBMC User

Scenarios
This section describes how to change the initial password of the default iBMC user on the
iBMC WebUI.
You can change the initial password of the default iBMC user on:
l
l
Procedure
Step 1 Log in to the iBMC WebUI.
For details, see
Issue 08 (2019-10-30)
Configure the iBMC. The configuration method varies depending on the iBMC version.
For details, see FusionServer Pro Rack Server iBMC User
Configure RAID settings. For details, see
User Guide.
Configure BIOS settings. For details, see
Parameter Reference.
Install the operating system. For details, see
Handle alarms. For details, see
Handling.
Rectify faults. For details, see
iBMC WebUI
For details, see FusionServer Pro Rack Server iBMC User
iBMC CLI
For details, see FusionServer Pro Rack Server iBMC User
l The default user name of the iBMC is Administrator, and the default password is Admin@9000.
l For security purposes, change the initial password upon the first login and change the password
periodically.
l You are advised to use a password that meets complexity requirements or to enable the password
complexity check function.
l The password complexity check function is enabled by default.
9.2 Logging In to the iBMC
Copyright © Huawei Technologies Co., Ltd.
Description
Upgrade software or firmware, and install or update drivers to
the latest versions.
Huawei V5 Server RAID Controller Card
Huawei Server Purley Platform BIOS
Huawei Server OS Installation
FusionServer Pro Rack Server iBMC Alarm
Huawei Servers
WebUI.
7 Installation and Configuration
Guide.
Troubleshooting.
Guide.
Guide.
Guide.
103