Call Coverage - NEC DS1000 Quick Setup Manual

Section 1: Start-up Programming
3. To initialize the system, type Y + HOLD .
To cancel initialization and leave the site specific programming intact, type N + HOLD .

Call Coverage

A Call Coverage Key allows an extension user to "cover" a co-worker's calls from their own telephone. The
Call Coverage Key indicates whenever the co-worker's phone rings. The user can then press the key to pick
up the co-worker's call. When the covered co-worker's phone is idle, the user can press the Call Coverage
Key to place an Intercom call to the co-worker.
To set up Call Coverage Keys:
1. Enter the programming mode. You see:
USER: nnn
ENTER PROGRAM?
2. Enter 1701 + HOLD . You see:
1701:KEY PROGRAMMING
STATION #?300
3. Enter the number of the extension that you want to have Call Coverage Keys + HOLD . You see:
1701:STA:nnn
KEY NUMBER?n
4. For the extension selected in step 3, enter the number of the Programmable Function Key you want to
program as a Call Coverage Key (1-24) + HOLD . You see:
1701:STA:nnn KEY:nnn
nnnnnn
5. Enter the Call Coverage Key code for the selected key:
06 = Immediate ring Call Coverage Key
07 = Lamp only Call Coverage Key (no ring)
08 = Delay ring Call Coverage Key
ENTER KEY DATA
CALL CVR nnnnnn
6. Enter the number of the extension that should be covered (i.e., the co-worker's extension) + HOLD +
CONF
1701:STA:nnn
KEY NUMBER?n
7. Go back to step 4 and select another key to program.
Press CONF to go back to step 3 and select another extension.
Press CONF twice to exit program 1701.
1-16 Section 1: Start-up Programming
OR
The previously programmed assignment displays.
. You see:
OR
OR
DS1000/2000 Quick Setup Guide