Ch 2 - Introduction to the DT900 Series Phones
I
NTRODUCTION TO THE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DT900/DT900S Series Phone User Guide
DT900 P
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D T 9 0 0 S E R I E S P H O N E S
P L A T F O R M C O M P A T I B I L I T Y
The various models of SIP phones can be used on various communication server
platforms, including the following:
• NSIP (NECi) firmware on the Univerge platforms
• 3C system platform (equipped with Open SIP firmware)
• SIP@Net platform (equipped with Open SIP firmware)
This manual describes the general functionality of phones running on a platform
equipped with Open SIP firmware and either the 3C system or SIP@Net platform.
For general information on using the phone, see the Quick Reference Guide for the
specific phone model.
Depending on the model of your phone and the configuration of your system, not all
features may be available on your phone.
K E Y S A N D P A R T S
For a list of specific features for supported DT900 Series Phones, refer to the
UNIVERGE 3C Compatibility Mega Matrix.
HONES
2
2-3