Table 6-22 Cd-8Dlca/Cd-16Dlca Maximum Upgrade Capacities; Table 6-23 Cd-8Dlca/Cd-16Dlca Led Indications - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
LED Indication
Live LED Busy LED
(Green) (Red)
On On
Flash (1s) On
Flash (1s)
6 - 50

Table 6-22 CD-8DLCA/CD-16DLCA Maximum Upgrade Capacities

provides the maximum capacities for the ESIU blades when they are
upgraded.
Table 6-22 CD-8DLCA/CD-16DLCA Maximum Upgrade Capacities
19"
ESIU Chassis
with CPU
5
CD-8DLCA
5
CD-16DLCA
4.1.2 Installation
The CD-8DLCA/CD-16DLCA blades can be installed in any universal
slot in the system and up to a maximum of 20 DLCA blades can be
installed per system, providing up to 320 digital ports.
To install the PZ-8DLCB
1. If installing the CD-8DLCA and the PZ-8DLCB daughter board
is to be attached, do so now. Refer to
page
2. Each CNx01 connector (CN101, CN201, CN301, CN401) is
used to connect up to four digital extensions.
4.1.3 LED Indications
LEDs for the CD-8DLCA
CD-8DLCA/CD-16DLCA LED
associated function and LED and Operational status. Refer to
6-15 CD-8DLCA Blade
location of the LEDs on the blades.

Table 6-23 CD-8DLCA/CD-16DLCA LED Indications

Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
19" Chassis
without CPU
6
5
CD-16DLCA:
/
6-54.
CD-16DLCA are described in
/
Indications. Each LED is listed with its
and Figure 6-16 CD-16DLCA Blade
Installing the SV8100/SV8300 Blades
UNIVERGE SV8100/SV8300
19" Chassis Networked
x4 Chassis
23
20
4.2.2 Installation on
Table 6-23
Remarks
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
32
32
Figure
for the