Voice Mail Daughter Board (Vmdb-B1) (Figure 2-13 - Figure 2-14); P/N 0911026 - NEC ux5000 Hardware Manual

Chapter 2 - Blade Installation and Startup
2.4.4

Voice Mail Daughter Board (VMDB-B1) (Figure 2-13 - Figure 2-14)

The UX IntraMail voice mail is a fully integrated, blade-based "in-skin" Voice Mail with Automated Attendant. In
addition to the voice mail function, the daughter board provides Voice Recording Service (VRS) and modem
capability for remote maintenance functions. Its robust feature set rivals the capabilities of stand-alone
products on a single, plug-in voice mail blade. This daughter board is installed on the CCPU.
The VMDB-B1 daughter board provides channels for voice mail (a compact flash blade is required for voice
mail) and a single channel V34 modem.
Depending on the compact flash card used, the voice mail can provide either 16 or 32 hours. The number of
ports available is determined by the port licensed used. Four ports are provided by default.
This daughter board does not have any switches which need to be set and does not require any hardware
setting. You can install 1 maximum IntraMail per system providing a maximum of 16 ports. When used on a
UX5000 with up to 256 ports, the voice mail will be assigned the ports out of the range of communication
server ports. When used on a UX5000 with up to 512 ports, the voice mail will be assigned ports within the
range of station/trunk ports. Use Program 47-01-17 to determine the start port for the IntraMail.
Refer to the IntraMail System Guide (P/N 0913240) for complete set-up information. Refer to the UX Mail
Manual (P/N 0913250) for installation and programming information on the UX Mail (APSU) blade.
2 - 32
• The voice mail function requires the UX IntraMail compact flash
card, which will provide both voice mail and VRS functions.
CN2
CF Card
Slot for
Voice Mail
Interface
LED1
CF Card
Status
LED
Figure 2-13: VMDB DAUGHTER BOARD

- P/N 0911026

Memory
DSP
Spacer Holes x 2
CN1
Connects
to CN4 Connector
on CCPU
Spacer Holes x 2
Chapter 2