Auerswald COMpact 5200 Advanced Information page 1239

Logging
the entry field, to accept the legal notes and then click D-channel output
via IP.
Système de protocole
Connection data can be logged using the D-channel decoder PC
programme or on a syslog server configured for this purpose.
Important: If Logging enabled is enabled and D-channel has been
selected, anyone within the network can record a D-channel protocol
over IP. A D-channel protocol also displays sensitive data, such as
call connection data. That is why you should only enable the Logging
enabled function if you need to create logs for error analysis purposes.
Décodeur de canal D
Install the D-channel decoder PC programme and initiate logging (see
Recording the D-Channel
Serveur Syslog
Enter the IP address and the port of the syslog server.
Configuring the syslog server
A protocol can be recorded to log and display control and management
information about the connections to the PBX e.g. to display errors. You
will thus be able to see the error type, and maybe even its cause, from the
list of transferred information.
Requirements:
• Syslog server configured by the system administrator
• Knowledge of the IPv4 or IPv6 address and UDP port number of the
syslog server
IP serveur Syslog
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
Protocol).
- 1239 -