Siemens HiPath 3000 Series Service Documentation page 69

Nur für den internen Gebrauch
3 The maximum number is calculated on the basis of the system-specific capacity limits, See Section 2.3, "System-Specific
Capacity Limits for HiPath 3000, HiPath 5000".
Boards for Tie Trunk Traffic
Table 2-12 Tie Trunk Traffic Boards for HiPath 3550
Board Capacity
Name
HXGS3 2 8
STLS2 2 4
STLS4 4 8
TS2N 30 30
1 The maximum number is calculated on the basis of the system-specific capacity limits, See Section 2.3, "System-Specific
Capacity Limits for HiPath 3000, HiPath 5000".
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Coun-
try
3 x x HG 1500 board for connecting the HiPath 3550 system di-
rectly to a local data network (Ethernet).
1
# x - Board for ISDN basic rate access.
Configuration of ISDN trunks, tie trunks, and stations (no
1
# x x
feeding) on the same board is possible.
1 x - Board for primary rate access; can be used for tie trunk traf-
fic.
In HiPath 3000/5000 V5.0 and later, the B channels in the
TS2N board are subject to license. Consequently, the TS2N
boards (S30810-Q2913-X300) have been assigned a new
hardware identification code. The new code prevents the
board from being used in earlier versions. Functionality and
layout of the board have not been changed.
Type/Description
sysdat.fm
System Data
HiPath 3000
2-29