Edge-Core ECS4660-28F Management Manual page 1463

E
This command configures the MLD Snooping robustness variable. Use the
ipv6 mld snooping
no form to restore the default value.
robustness
S
D
2
C
Global Configuration
C
A port will be removed from the receiver list for a multicast service when
no MLD reports are detected in response to a number of MLD queries. The
robustness variable sets the number of queries on ports for which there is
no report.
E
This command configures the MLD query timeout. Use the no form to
ipv6 mld snooping
restore the default.
router-port-
expire-time
S
D
300 seconds
C
Global Configuration
XAMPLE
Console(config)#ipv6 mld snooping query-max-response-time seconds 15
Console(config)#
YNTAX
ipv6 mld snooping robustness value
no ipv6 mld snooping robustness
value - The number of the robustness variable. (Range: 2-10)
S
EFAULT ETTING
M
OMMAND ODE
U
OMMAND SAGE
XAMPLE
Console(config)#ipv6 mld snooping robustness 2
Console(config)#
YNTAX
ipv6 mld snooping router-port-expire-time time
no ipv6 mld snooping router-port-expire-time
time - Specifies the timeout of a dynamically learned router port.
(Range: 300-500 seconds)
S
EFAULT ETTING
M
OMMAND ODE
– 1463 –
| Multicast Filtering Commands
C 43
HAPTER
MLD Snooping