Table 271: Show Ip Bgp - Display Description - Edge-Core ECS4660-28F Management Manual

Hide thumbs Also See for ECS4660-28F:

Table of Contents

| IP Routing Commands

Border Gateway Protocol (BGPv4)

Display Information

Use this command to specify a weight for all the routes learned from a

neighbor. The route with the highest weight gets preference over other

routes to the same network.

Weights assigned using the

assigned by this command.

Console(config-router)#neighbor 10.1.1.66 weight 500

Console(config-router)#

This command shows entries in the routing table.

show ip bgp ip-address [netmask [longer-prefixes]]

ip-address – IP address of a route entry.

netmask – Network mask for the route. This mask identifies the

network address bits used for the associated routing entries.

longer-prefixes – Specified route and all more specific routes.

Privileged Exec

Console#show ip bgp

BGP table version is 0, local router ID is 192.168.0.2

Status codes: s suppressed, d damped, h history, * valid, > best, i internal,

r RIB-failure, S Stale, R Removed

Origin codes: i - IGP, e - EGP, ? - incomplete

*>100.1.1.0/24

*>100.1.2.0/24

*i192.168.0.0/24

Total number of prefixes 4

Table 271: show ip bgp - display description

Internal version number of routing table, incremented per table change.

local router ID

IP address of router.

command override those

Metric LocPrf Weight Path

Table of Contents