Edge-Core ECS4660-28F Management Manual page 1050

| Authentication Commands
C 28
HAPTER
AAA
authorization exec
show accounting
E
XAMPLE
Console(config)#line console
Console(config-line)#accounting exec tps
Console(config-line)#exit
Console(config)#line vty
Console(config-line)#accounting exec default
Console(config-line)#
This command applies an authorization method to local console, Telnet or
SSH connections. Use the no form to disable authorization on the line.
S
YNTAX
authorization exec {default | list-name}
no authorization exec
default - Specifies the default method list created with the
authorization exec
list-name - Specifies a method list created with the
authorization exec
D S
EFAULT ETTING
None
C M
OMMAND ODE
Line Configuration
E
XAMPLE
Console(config)#line console
Console(config-line)#authorization exec tps
Console(config-line)#exit
Console(config)#line vty
Console(config-line)#authorization exec default
Console(config-line)#
This command displays the current accounting settings per function and
per port.
S
YNTAX
show accounting [commands [level]] |
[[dot1x [statistics [username user-name | interface interface]]
| exec [statistics] | statistics]
commands - Displays command accounting information.
level - Displays command accounting information for a specifiable
command level.
dot1x - Displays dot1x accounting information.
exec - Displays Exec accounting records.
– 1050 –
command.
command.
aaa
aaa