Table 193: Show Mvr - Display Description - Edge-Core ECS4660-28F Management Manual

| Multicast Filtering Commands
C 43
HAPTER
MVR for IPv4
show mvr
associated-profile
MVR Running Status
MVR Multicast VLAN
MVR Current Learned Groups
MVR Upstream Source IP
. .
.

Table 193: show mvr - display description

Field Description
MVR 802.1p Forwarding Priority assigned to multicast traffic forwarded into the MVR VLAN
Priority
MVR Proxy Switching Shows if MVR proxy switching is enabled
MVR Robustness Value Shows the number of reports or query messages sent when proxy
switching is enabled
MVR Proxy Query Interval Shows the interval at which the receiver port sends out general
queries
MVR Source Port Mode Shows if the switch forwards all multicast streams, or only those
which the source port has dynamically joined
MVR Domain An independent multicast domain.
MVR Config Status Shows if MVR is globally enabled on the switch.
MVR Running Status Indicates whether or not all necessary conditions in the MVR
environment are satisfied. (Running status is true as long as MVR
Status is enabled, and the specified MVR VLAN exists.)
MVR Multicast VLAN Shows the VLAN used to transport all MVR multicast traffic.
MVR Current Learned The current number of MVR group addresses
Groups
MVR Upstream Source IP The source IP address assigned to all upstream control packets.
This command shows the profiles bound the specified domain.
S
YNTAX
show mvr [domain domain-id] associated-profile
domain-id - An independent multicast domain. (Range: 1-5)
D S
EFAULT ETTING
Displays profiles bound to all MVR domains.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
The following displays the profiles bound to domain 1:
Console#show mvr domain 1 associated-profile
Domain ID : 1
MVR Profile Name Start IP Addr.
-------------------- --------------- ---------------
rd
– 1490 –
: Active
: 1
: 10
: 192.168.0.3
End IP Addr.
228.1.23.1 228.1.23.10