Table of Contents
Advertisement
C
OMMAND
This command enables a polling data source and configures the interval at
which counter values are added to the sample datagram.
E
XAMPLE
This example sets the polling interval to 10 seconds.
Console(config)#interface ethernet 1/9
Console(config-if)#sflow polling-interval 10
Console(config-if)#
This command shows the global and interface settings for the sFlow
show sflow
process.
S
YNTAX
show sflow [ owner owner-name | interface interface]
owner-name - The associated receiver, to which the samples are
sent. (Range: 1-30 alphanumeric characters)
interface
C
OMMAND
Privileged Exec
E
XAMPLE
Console#show sflow interface ethernet 1/2
Receiver Owner Name
Receiver Timeout
Receiver Destination
Receiver Socket Port
Maximum Datagram Size : 1400 bytes
Datagram Version
Data Source
Sampling Instance ID
Sampling Rate
Maximum Header Size
Console#
U
SAGE
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-28)
M
ODE
: stat1
: 99633 sec
: 192.168.32.32
: 6343
: 4
: Eth 1/2
: 1
: 512
: 128 bytes
– 1029 –
| Flow Sampling Commands
C
27
HAPTER
Advertisement
Chapters
Table of Contents
