Edge-Core ECS4660-28F Management Manual page 1464

| Multicast Filtering Commands
C 43
HAPTER
MLD Snooping
ipv6 mld snooping
unknown-multicast
mode
C U
OMMAND SAGE
The router port expire time is the time the switch waits after the previous
querier stops before it considers the router port (i.e., the interface that had
been receiving query packets) to have expired.
E
XAMPLE
Console(config)#ipv6 mld snooping router-port-expire-time 300
Console(config)#
This command sets the action for dealing with unknown multicast packets.
Use the no form to restore the default.
S
YNTAX
ipv6 mld snooping unknown-multicast mode {flood |
to-router-port}
[no] ipv6 mld snooping unknown-multicast mode
flood - Floods the unknown multicast data packets to all ports.
to-router-port - Forwards the unknown multicast data packets to
router ports.
D S
EFAULT ETTING
to-router-port
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
When set to "flood," any received IPv6 multicast packets that have not
◆
been requested by a host are flooded to all ports in the VLAN.
When set to "router-port," any received IPv6 multicast packets that
◆
have not been requested by a host are forwarded to ports that are
connected to a detected multicast router.
E
XAMPLE
Console(config)#ipv6 mld snooping unknown-multicast mode flood
Console(config)#
– 1464 –