Table 200: Show Mvr6 - Display Description - Edge-Core ECS4660-28F Management Manual

| Multicast Filtering Commands
C 43
HAPTER
MVR for IPv6
show mvr6
associated-profile
MVR6 Proxy Query Interval
MVR6 Source Port Mode
MVR6 Domain
MVR6 Config Status
MVR6 Running Status
MVR6 Multicast VLAN
MVR6 Current Learned Groups : 0
MVR6 Upstream Source IP
. .
.

Table 200: show mvr6 - display description

Field Description
MVR Proxy Switching Shows if MVR proxy switching is enabled
MVR6 Proxy Query The interval at which the receiver port sends out general queries
Interval
MVR6 Source Port Shows if the switch only forwards multicast streams which the
Mode source port has dynamically joined or always forwards multicast
streams
MVR Robustness Value Shows the number of reports or query messages sent when proxy
switching is enabled
MVR6 Domain An independent multicast domain.
MVR6 Config Status Shows if MVR is globally enabled on the switch.
MVR6 Running Status Indicates whether or not all necessary conditions in the MVR
environment are satisfied. (Running status is true as long as MVR
Status is enabled, and the specified MVR VLAN exists, and a source
port with a valid link has been configured (using the
command.)
MVR6 Multicast VLAN Shows the VLAN used to transport all MVR multicast traffic.
MVR Current Learned The current number of MVR group addresses
Groups
MVR6 Upstream The source IP address assigned to all upstream control packets.
Source IP
This command shows the profiles bound the specified domain.
S
YNTAX
show mvr6 [domain domain-id] associated-profile
domain-id - An independent multicast domain. (Range: 1-5)
D S
EFAULT ETTING
Displays profiles bound to all MVR domains.
C M
OMMAND ODE
Privileged Exec
– 1508 –
: 125(sec.)
: Always Forward
: 1
: Enabled
: Active
: 1
: FF05::25
mvr6 type