Table of Contents
Advertisement
R
ELATED
ip pim override-interval (1933)
ip pim propagation-delay (1934)
This command configures the override interval, or the time it takes a
ip pim
downstream router to respond to a lan-prune-delay message. Use the no
override-interval
form to restore the default setting.
S
YNTAX
D
EFAULT
2500 milliseconds
C
OMMAND
Interface Configuration (VLAN)
C
OMMAND
The override interval configured by this command and the propagation
delay configured by the
calculate the LAN prune delay. If a downstream router has group members
which want to continue receiving the flow referenced in a LAN prune delay
message, then the override interval represents the time required for the
downstream router to process the message and then respond by sending a
Join message back to the upstream router to ensure that the flow is not
terminated.
E
XAMPLE
Console(config-if)#ip pim override-interval 3500
Console(config-if)#
R
ELATED
ip pim propagation-delay (1934)
ip pim lan-prune-delay (1932)
C
OMMANDS
ip pim override-interval milliseconds
no ip pim override-interval
milliseconds - The time required for a downstream router to
respond to a lan-prune-delay message by sending back a Join
message if it wants to continue receiving the flow referenced in the
message. (Range: 500-6000 milliseconds)
S
ETTING
M
ODE
U
SAGE
ip pim propagation-delay
C
OMMANDS
– 1933 –
| Multicast Routing Commands
C
52
HAPTER
PIM Multicast Routing
command are used to
Advertisement
Chapters
Table of Contents
