Edge-Core ECS4660-28F Management Manual page 1422

| Quality of Service Commands
C 42
HAPTER
show class-map
show policy-map
This command displays the QoS class maps which define matching criteria
used for classifying traffic.
S
YNTAX
show class-map [class-map-name]
class-map-name - Name of the class map. (Range: 1-32 characters)
D S
EFAULT ETTING
Displays all class maps.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#show class-map
Class Map match-any rd-class#1
Description:
Match IP DSCP 10
Match access-list rd-access
Match IP DSCP 0
Class Map match-any rd-class#2
Match IP Precedence 5
Class Map match-any rd-class#3
Match VLAN 1
Console#
This command displays the QoS policy maps which define classification
criteria for incoming traffic, and may include policers for bandwidth
limitations.
S
YNTAX
show policy-map [policy-map-name [class class-map-name]]
policy-map-name - Name of the policy map.
(Range: 1-32 characters)
class-map-name - Name of the class map. (Range: 1-32 characters)
D S
EFAULT ETTING
Displays all policy maps and all classes.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#show policy-map
Policy Map rd-policy
– 1422 –