Table of Contents
Advertisement
D
EFAULT
Disabled
C
OMMAND
Interface Configuration
C
OMMAND
◆
◆
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#network-access guest-vlan 25
Console(config-if)#
Use this command to enable link detection for the selected port. Use the
network-access
no form of this command to restore the default.
link-detection
S
YNTAX
D
EFAULT
Disabled
C
OMMAND
Interface Configuration
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#network-access link-detection
Console(config-if)#
S
ETTING
M
ODE
U
SAGE
The VLAN to be used as the guest VLAN must be defined and set as
active (See the
vlan database
When used with 802.1X authentication, the intrusion-action must be
set for "guest-vlan" to be effective (see the
command).
[no] network-access link-detection
S
ETTING
M
ODE
– 1101 –
| General Security Measures
C
29
HAPTER
Network Access (MAC Address Authentication)
command).
dot1x intrusion-action
Advertisement
Chapters
Table of Contents
