Edge-Core ECS4660-28F Management Manual page 1474

| Multicast Filtering Commands
C 43
HAPTER
MLD Filtering and Throttling
ipv6 mld
max-groups action
ipv6 mld query-drop
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#ipv6 mld max-groups 10
Console(config-if)#
This command sets the MLD throttling action for an interface on the switch.
S
YNTAX
ipv6 mld max-groups action {deny | replace}
deny - The new multicast group join report is dropped.
replace - The new multicast group replaces an existing group.
D S
EFAULT ETTING
Deny
C M
OMMAND ODE
Interface Configuration (Ethernet)
C U
OMMAND SAGE
When the maximum number of groups is reached on a port, the switch can
take one of two actions; either "deny" or "replace." If the action is set to
deny, any new MLD join reports will be dropped. If the action is set to
replace, the switch randomly removes an existing group and replaces it
with the new multicast group.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#ipv6 mld max-groups action replace
Console(config-if)#
This command drops any received MLD query packets. Use the no form to
restore the default setting.
S
YNTAX
[no] ipv6 mld query-drop
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Interface Configuration (Ethernet)
– 1474 –