Table 281: Static Multicast Routing Commands - Edge-Core ECS4660-28F Management Manual

S M
TATIC ULTICAST
ip igmp snooping
vlan mrouter
This example lists all entries in the multicast table in summary form:
Console#show ipv6 mroute summary
IP Multicast Forwarding is disabled
IP Multicast Routing Table (Summary)
Flags: F - Forwarding, P - Pruned, D - PIM-DM, S – PIM-SM, V – DVMRP,
M - MLD
Group
------------------------------ ------------------------------ ---------- ----
Total Entry is 1
Console#
R
OUTING
This section describes commands used to configure static multicast routes
on the switch.

Table 281: Static Multicast Routing Commands

Command
ip igmp snooping vlan
mrouter
show ip igmp snooping
mrouter
This command statically configures a multicast router port. Use the no
form to remove the configuration.
S
YNTAX
ip igmp snooping vlan vlan-id mrouter interface
no ip igmp snooping vlan vlan-id mrouter interface
vlan-id - VLAN ID (Range: 1-4094)
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-8)
D S
EFAULT ETTING
No static multicast router ports are configured.
C M
OMMAND ODE
Global Configuration
– 1925 –
C 52
HAPTER
Source
FF02::0101
Function
Adds a multicast router port
Shows multicast router ports
| Multicast Routing Commands
Static Multicast Routing
Interface
FE80::0101 VLAN 4096
Mode
GC
PE
Flag
DF