Edge-Core ECS4660-28F Management Manual page 1052

| Authentication Commands
C 28
HAPTER
Web Server
ip http port
ip http server
This command specifies the TCP port number used by the web browser
interface. Use the no form to use the default port.
S
YNTAX
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
D S
EFAULT ETTING
80
C M
OMMAND ODE
Global Configuration
E
XAMPLE
Console(config)#ip http port 769
Console(config)#
R C
ELATED OMMANDS
ip http server (1052)
show system (906)
This command allows this device to be monitored or configured from a
browser. Use the no form to disable this function.
S
YNTAX
[no] ip http server
D S
EFAULT ETTING
Enabled
C M
OMMAND ODE
Global Configuration
E
XAMPLE
Console(config)#ip http server
Console(config)#
R C
ELATED OMMANDS
ip http port (1052)
show system (906)
– 1052 –