Table 269: Show Ipv6 Ospf Virtual-Links - Display Description - Edge-Core ECS4660-28F Management Manual

C
?
C
?
Console#
This command displays detailed information about virtual links.
show ipv6 ospf
virtual-links
S
YNTAX
show ipv6 ospf [tag process-id] virtual-links
C
OMMAND
Privileged Exec
E
XAMPLE
Console#show ipv6 ospf virtual-links
Virtual Link VLINK1 to router 192.168.0.2 is up
Transit area 0.0.0.1 via interface VLAN1
Local address 192.168.0.3
Remote address 192.168.0.2
Transmit Delay is 1 sec, State Point-To-Point,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Console#

Table 269: show ipv6 ospf virtual-links - display description

Field
Virtual Link to
router
Transit area
Local address
Remote address The IP address this virtual neighbor is using. The neighbor must be an ABR
Transmit Delay
Timer intervals
2001:DB8:2222:7272::/64, VLAN1
FE80::/64, VLAN1 inactive
FE80::/64, VLAN1
FF00::/8, VLAN1 inactive
process-id - The ID of the router process for which information will
be displayed. (Range: 1-10)
M
ODE
Hello due in 00:00:02
Adjacency state Full
Description
OSPF neighbor and link state (up or down)
Common area the virtual link crosses to reach the target router
The IP address of ABR that serves as an endpoint connecting the isolated
area to the common transit area.
at the other endpoint connecting the common transit area to the backbone
itself.
Estimated transmit delay (in seconds) on the virtual link
Configuration settings for timer intervals, including Hello, Dead and
Retransmit
– 1817 –
| IP Routing Commands
C 51
HAPTER
Open Shortest Path First (OSPFv3)