Edge-Core ECS4660-28F Management Manual page 1886

Hide thumbs Also See for ECS4660-28F:

Table of Contents

| IP Routing Commands

Border Gateway Protocol (BGPv4)

This command shows routes which use classless interdomain routing

network masks.

show ip bgp cidr-only

Privileged Exec

This example shows routes that do not match the natural A, B, C or D

network masks defined for the earliest IP networks.

Console#show ip bgp cidr-only

BGP table version is 0, local router ID is 192.168.0.2

Status codes: s suppressed, d damped, h history, * valid, > best, i internal,

r RIB-failure, S Stale, R Removed

Origin codes: i - IGP, e - EGP, ? - incomplete

*>3.3.3.0/24

*>6.6.6.0/24

This command shows routes that belong to specified BGP communities.

show ip bgp community [{[AA:NN] [internet] [local-as]

[no-advertise] [no-export]} [exact-match]]

AA:NN – Standard community-number to match. The 4-byte

community number is composed of a 2-byte autonomous system

number and a 2-byte network number, separated by one colon.

Each 2-byte number can range from 0 from 65535. One or more

communities can be entered, separated by a space. Up to 16

community numbers are supported.

internet – Specifies the entire Internet. Routes with this

community attribute are advertised to all internal and external

local-as – Specifies the local autonomous system. Routes with this

community attribute are advertised only to peers that are part of

the local autonomous system or to peers within a sub-autonomous

system of a confederation. These routes are not advertised to

external peers or to other sub-autonomous systems within a

confederation.

no-advertise – Routes with this community attribute are not

advertised to any internal or external peer.

no-export – Routes with this community attribute are advertised

only to peers in the same autonomous system or to other sub-

Metric LocPrf Weight Path

Chapters

Table of Contents