Edge-Core ECS4660-28F Management Manual page 1102

| General Security Measures
C 29
HAPTER
Network Access (MAC Address Authentication)
network-access
link-detection
link-down
network-access
link-detection
link-up
Use this command to detect link-down events. When detected, the switch
can shut down the port, send an SNMP trap, or both. Use the no form of
this command to disable this feature.
S
YNTAX
network-access link-detection link-down
action [shutdown | trap | trap-and-shutdown]
no network-access link-detection
action - Response to take when port security is violated.
shutdown - Disable port only.
trap - Issue SNMP trap message only.
trap-and-shutdown - Issue SNMP trap message and disable
the port.
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Interface Configuration
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#network-access link-detection link-down action trap
Console(config-if)#
Use this command to detect link-up events. When detected, the switch can
shut down the port, send an SNMP trap, or both. Use the no form of this
command to disable this feature.
S
YNTAX
network-access link-detection link-up
action [shutdown | trap | trap-and-shutdown]
no network-access link-detection
action - Response to take when port security is violated.
shutdown - Disable port only.
trap - Issue SNMP trap message only.
trap-and-shutdown - Issue SNMP trap message and disable
the port.
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Interface Configuration
– 1102 –