Edge-Core ECS4660-28F Management Manual page 1633

Table 232: DHCP Server Commands (Continued)
Command
lease
netbios-name-server
netbios-node-type
network
next-server
clear ip dhcp binding
show ip dhcp
show ip dhcp binding
show ip dhcp pool
*
This command specifies IP addresses that the DHCP server should not
ip dhcp
assign to DHCP clients. Use the no form to remove the excluded IP
excluded-address
addresses.
S
D
All IP pool addresses may be assigned.
C
Global Configuration
E
Function
Sets the duration an IP address is assigned to a DHCP
client
Configures NetBIOS Windows Internet Naming Service
(WINS) name servers available to Microsoft DHCP
clients
Configures NetBIOS node type for Microsoft DHCP
clients
Configures the subnet number and mask for a DHCP
address pool
Configures the next server in the boot process of a
DHCP client
Deletes an automatic address binding from the DHCP
server database
Displays brief list of DHCP address pools
Displays address bindings on the DHCP server
Displays configuration settings for DHCP address pools PE
These commands are used for manually binding an address to a client.
YNTAX
[no] ip dhcp excluded-address low-address [high-address]
low-address - An excluded IP address, or the first IP address in an
excluded address range.
high-address - The last IP address in an excluded address range.
S
EFAULT ETTING
M
OMMAND ODE
XAMPLE
Console(config)#ip dhcp excluded-address 10.1.0.19
Console(config)#
– 1633 –
| DHCP Commands
C 48
HAPTER
DHCP Server
Mode
DC
DC
DC
DC
DC
PE
PE
PE