Table 132: Acl Information Commands - Edge-Core ECS4660-28F Management Manual

| Access Control Lists
C 30
HAPTER
ACL Information
ACL I
NFORMATION
clear access-list
hardware counters
show access-group
This section describes commands used to display ACL information.

Table 132: ACL Information Commands

Command Function
clear access-list Clears hit counter for rules in all ACLs, or in a specified
hardware counters ACL.
show access-group Shows the ACLs assigned to each port
show access-list Show all ACLs and associated rules
This command clears the hit counter for the rules in all ACLs, or for the
rules in a specified ACL.
S
YNTAX
clear access-list hardware counters
[direction {in | out} [interface interface]] |
[interface interface] | [name acl-name]
in – Clears counter for ingress rules.
out – Clears counter for egress rules.
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
acl-name – Name of the ACL. (Maximum length: 16 characters)
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#clear access-list hardware counters
Console#
This command shows the port assignments of ACLs.
C M
OMMAND ODE
Privileged Executive
E
XAMPLE
Console#show access-group
Interface ethernet 1/2
IP access-list david
– 1184 –
Mode
PE
PE
PE