Edge-Core ECS4660-28F Management Manual page 1217

Hide thumbs Also See for ECS4660-28F:

Table of Contents

Global Configuration

This command applies to all static and dynamic trunks on the switch.

To ensure that the switch traffic load is distributed evenly across all

links in a trunk, select the source and destination addresses used in the

load-balance calculation to provide the best result for trunk

connections:

dst-ip: All traffic with the same destination IP address is output on

the same link in a trunk. This mode works best for switch-to-router

trunk links where traffic through the switch is destined for many

different hosts. Do not use this mode for switch-to-server trunk

links where the destination IP address is the same for all traffic.

dst-mac: All traffic with the same destination MAC address is

output on the same link in a trunk. This mode works best for

switch-to-switch trunk links where traffic through the switch is

destined for many different hosts. Do not use this mode for switch-

to-router trunk links where the destination MAC address is the same

for all traffic.

src-dst-ip: All traffic with the same source and destination IP

address is output on the same link in a trunk. This mode works best

for switch-to-router trunk links where traffic through the switch is

received from and destined for many different hosts.

src-dst-mac: All traffic with the same source and destination MAC

address is output on the same link in a trunk. This mode works best

for switch-to-switch trunk links where traffic through the switch is

received from and destined for many different hosts.

src-ip: All traffic with the same source IP address is output on the

same link in a trunk. This mode works best for switch-to-router or

switch-to-server trunk links where traffic through the switch is

received from many different hosts.

src-mac: All traffic with the same source MAC address is output on

the same link in a trunk. This mode works best for switch-to-switch

trunk links where traffic through the switch is received from many

different hosts.

Console(config)#port-channel load-balance dst-ip

Console(config)#

| Link Aggregation Commands

Manual Configuration Commands

Chapters

Table of Contents