| Multicast Filtering Commands
C
43
HAPTER
IGMP Snooping
ip igmp snooping
vlan static
show ip igmp
snooping
This command adds a port to a multicast group. Use the no form to
remove the port.
S
YNTAX
[no] ip igmp snooping vlan vlan-id static ip-address interface
vlan-id - VLAN ID (Range: 1-4094)
ip-address - IP address for multicast group
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-8)
D
S
EFAULT
ETTING
None
C
M
OMMAND
ODE
Global Configuration
C
U
OMMAND
SAGE
Static multicast entries are never aged out.
◆
When a multicast entry is assigned to an interface in a specific VLAN,
◆
the corresponding traffic can only be forwarded to ports within that
VLAN.
E
XAMPLE
The following shows how to statically configure a multicast group on a port.
Console(config)#ip igmp snooping vlan 1 static 224.0.0.12 ethernet 1/5
Console(config)#
This command shows the IGMP snooping, proxy, and query configuration
settings.
S
YNTAX
show ip igmp snooping [vlan vlan-id]
vlan-id - VLAN ID (1-4094)
C
M
OMMAND
ODE
Privileged Exec
– 1442 –