Edge-Core ECS4660-28F Management Manual page 1027

This example shows how to modify the sFlow port number for an already
configured collector.
Console(config)#sflow owner stat_server1 timeout 100 port 35100
Console(config)#
This command enables an sFlow data source instance for a specific
sflow sampling
interface that takes samples periodically based on the number of packets
instance
processed. Use the no form to remove the sampling data source instance
from the switch's sFlow configuration.
S
YNTAX
sflow sampling {interface interface} instance instance-id
no sflow sample {interface interface} instance instance-id
D
EFAULT
No sFlow sampling instance id configured.
Maximu Header Size: 128 bytes
C
OMMAND
Privileged Exec
receiver owner-name sampling-rate sample-rate
[max-header-size max-header-size]
interface - The source from which the samples will be taken and
sent to a collector.
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-28)
instance-id - An instance ID used to identify the sampling source.
(Range: 1)
owner-name - The associated receiver, to which the samples will be
sent. (Range: 1-30 alphanumeric characters)
sample-rate - The packet sampling rate, or the number of packets
out of which one sample will be taken. (Range: 256-16777215
packets)
max-header-size - The maximum size of the sFlow datagram
header. (Range: 64 to 256 bytes)
S
ETTING
M
ODE
– 1027 –
| Flow Sampling Commands
C 27
HAPTER