Table of Contents
Advertisement
E
XAMPLE
Console(config)#ip igmp profile 19
Console(config-igmp-profile)#permit
Console(config-igmp-profile)#
This command specifies multicast group addresses for a profile. Use the no
range
form to delete addresses from a profile.
S
YNTAX
[no] range low-ip-address [high-ip-address]
D
EFAULT
None
C
OMMAND
IGMP Profile Configuration
C
OMMAND
Enter this command multiple times to specify more than one multicast
address or address range for a profile.
E
XAMPLE
Console(config)#ip igmp profile 19
Console(config-igmp-profile)#range 239.1.1.1
Console(config-igmp-profile)#range 239.2.3.1 239.2.3.100
Console(config-igmp-profile)#
This command enables IGMP authentication on the specified interface.
ip igmp
When enabled and an IGMP JOIN request is received, an authentication
authentication
request is sent to a configured RADIUS server. Use the no form to disable
IGMP authentication.
S
YNTAX
[no] ip igmp authentication
D
EFAULT
Disabled
C
OMMAND
Interface Configuration(Ethernet, Port Channel)
low-ip-address - A valid IP address of a multicast group or start of a
group range.
high-ip-address - A valid IP address for the end of a multicast group
range.
S
ETTING
M
ODE
U
SAGE
S
ETTING
M
ODE
– 1451 –
| Multicast Filtering Commands
C
43
HAPTER
IGMP Filtering and Throttling
Advertisement
Chapters
Table of Contents
