Edge-Core ECS4660-28F Management Manual page 1443

C
OMMAND
This command displays global and VLAN-specific IGMP configuration
settings. See
page 613
E
XAMPLE
The following shows the current IGMP snooping configuration:
Console#show ip igmp snooping
IGMP Snooping
Router Port Expire Time
Router Alert Check
TCN Flood
TCN Query Solicit
Unregistered Data Flood
Unsolicited Report Interval
Version Exclusive
Version
Proxy Reporting
Querier
VLAN 1:
--------
IGMP Snooping
IGMP Snooping Running Status
Version
Version Exclusive
Immediate Leave
Last Member Query Interval
Last Member Query Count
General Query Suppression
Query Interval
Query Response Interval
Proxy Query Address
Proxy Reporting
Multicast Router Discovery
. .
.
This command shows known multicast group, source, and host port
show ip igmp
mappings for the specified VLAN interface, or for all interfaces if none is
snooping group
specified.
S
YNTAX
U
SAGE
"Configuring IGMP Snooping and Query Parameters" on
for a description of the displayed items.
show ip igmp snooping group [host-ip-addr ip-address interface |
igmpsnp | sort-by-port | user | vlan vlan-id [user | igmpsnp]]
ip-address - IP address for multicast group
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-8)
– 1443 –
| Multicast Filtering Commands
C 43
HAPTER
: Enabled
: 300 s
: Disabled
: Disabled
: Disabled
: Disabled
: 400 s
: Disabled
: 2
: Enabled
: Disabled
: Enabled
: Inactive
: Using global version (2)
: Using global status (Disabled)
: Disabled
: 10 (1/10s)
: 2
: Disabled
: 125
: 100 (1/10s)
: 0.0.0.0
: Using global status (Enabled)
: Enabled
IGMP Snooping